YAMAHA XVS 1100 A DragStar Classic (2007) wallpapers

YAMAHA XVS 1100 A DragStar Classic (2007) motorcycle.
General information, review, specifications and insurance information.

- Ease into top gear, wind the throttle back and feel the XVS1100A’s monster torque thrust you towards the horizon. The big DragStar Classic can do plenty of things, but this is what it does best. Sit down, hold on and realise life doesn’t get much better than this. -

YAMAHA XVS 1100 A DragStar Classic (2007)

Click Thumbnail to download (size 1600 x 1200 pixels)

Specifications

Model: Yamaha XVS 1100 A DragStar Classic
Year: 2007
Category: Custom / cruiser
Rating: 73.2 out of 100.

Engine and transmission
Displacement: 1063.00 ccm (64.86 cubic inches)
Engine type: V2, four-stroke
Power: 61.68 HP (45.0 kW)) @ 5750 RPM
Torque: 85.00 Nm (8.7 kgf-m or 62.7 ft.lbs) @ 8700 RPM
Compression: 8.3:1
Bore x stroke: 95.0 x 75.0 mm (3.7 x 3.0 inches)
Fuel system: Carburettor. Mikuni BDS37/2
Fuel control: SOHC
Ignition: TCI
Lubrication system: Wet sump
Cooling system: Air
Gearbox: 5-speed

Transmission type,
final drive: Shaft drive (cardan)
Clutch: Wet, multiple disc
Chassis, suspension, brakes and wheels
Frame type: -
Front suspension: Telescopic forks
Front suspension travel: 140 mm (5.5 inches)
Rear suspension: Swingarm link suspension
Rear suspension travel: 200 mm (7.9 inches)
Front tyre dimensions: 130/90-(16
Rear tyre dimensions: 170/80-(15
Front brakes: Double disc
Front brakes diameter: 298 mm (11.7 inches)
Rear brakes: Single disc
Rear brakes diameter: 282 mm (11.1 inches)
Physical measures and capacities
Dry weight: 272.0 kg (599.7 pounds)
Power/weight ratio: 0.2268 HP/kg
Seat height: 710 mm (28.0 inches) If adjustable, lowest setting.
Overall height: 1,095 mm (43.1 inches)
Overall length: 2,460 mm (96.9 inches)
Overall width: 945 mm (37.2 inches)
Ground clearance: 145 mm (5.7 inches)
Wheelbase: 1,645 mm (64.8 inches)
Fuel capacity: 17.00 litres (4.49 gallons)

Other specifications
Starter: Electric
Comments: For the European market.

Motorcycle Insurance Informations Who will provide physical damage insurance coverage for custom built motorcycles? Nationwide - Custom parts and equipment coverage (up to $30,000), Custom and limited edition bikes and trikes coverage (up to $50,000), Kit and vintage bike coverage (up to $30,000) (nationwide.com/motorcycle-insurance-coverage.jsp) Safeco insures a full spectrum of motorcycles from street cycles, Harley Davidsons, cruisers and touring bikes to dirt bikes and ATVs. If you select custom parts coverage, you will receive up to $3,000 in coverage without any additional cost to you. Coverage is available for up to $10,000 in custom parts and equipment. (safeco.com/personal/motorcycle/coverage-options) Progressive - Motorcycle coverage - when you purchase Comprehensive or Collision coverage, at least $1,000 of Custom Parts and Equipment (CPE)/Accessory coverage - Custom paint, custom plating or custom exhaust is included in most states. Additional CPE coverage can be purchased to cover equipment, up to $30,000 in value.